• We need to separate inbound port for answering call and outbound ports for calling MWI?

• Configure message button to dial 6010

telephony-service
 voicemail 6010

• Does CUC listen on H323???
• Configure voice dial-peer to pilot number 6010 when user presses the message button

dial-peer voice 10 voip
 destination-pattern 6010
 session target ipv4:<cuc-sub-ip>
 dtmf-relay h245-alphanumeric
 codec g711ulaw
!
dial-peer voice 20 voip
 preference 1
 destination-pattern 6010
 session target ipv4:<cuc-pub-ip>
 dtmf-relay h245-alphanumeric
 codec g711ulaw
!

• ??? Instead of configuring separate inbound/outbound voice port
• number is pilot number 6010

ephone-dn 3 dual-line
 number 6010
 name VMail
!
ephone-dn 4 dual-line
 number 6010
 name VMail

• Configure voicemail device
• CME-VI1 and CME-VI2 must matches what's configured on CUC

ephone 3 
 vm-device-id CME-VI1
 button 1:3
!
ephone 4
 vm-device-id CME-VI2
 button 1:4

• Configure Inbound VPort DN to answer call

ephone-dn  11  dual-line
 number 3600
 description CUC1-VI1
 preference 1
 huntstop channel
 no huntstop
!
ephone-dn  12  dual-line
 number 3600
 preference 2
 huntstop channel      

• Configure Inbound VPort to answer call
• vm-device-id must matched what's configured on CUC

ephone  11
 device-security-mode none
 vm-device-id CUC1-VI1
 button  1:11
!
ephone  12
 device-security-mode none
 vm-device-id CUC1-VI2
 button  1:12

• Configure ephone port that set MWI — etc

ephone-dn  13
 number 3013
!
ephone-dn  14
 number 3013

• Configure Outbound VPort to set MWI
• vm-device-id must matched what's configured on CUC

ephone  13
 device-security-mode none
 vm-device-id CUC1-VO1
 button  1:13
!
ephone  14
 device-security-mode none
 vm-device-id CUC1-VO2
 button  1:14

• Configure MWI EPhone DN
• We will need the same number of DN as there is the number of Inbound port
• 3999 will turn MWI on and
• 3998 will turn MWI off

ephone-dn  18
 number 3999 secondary 3998
 mwi on-off
!
ephone-dn  19
 number 3999 secondary 3998
 mwi on-off

• Or

ephone-dn  18
 number 3999
 mwi on
!
ephone-dn  19
 number 3998
 mwi off

• Configure Phone System
  • Configure as SCCP and CCME integration
• Configure Port Group
  • I think we need to create two separate port groups for Inbound and Outbound ports?
• Add ports