Barge and Privacy

• cBarge is supported on SCCP shared octo-line directory numbers and SIP shared-line directory numbers.
• Privacy or Privacy on hold are supported on SCCP octo-line directory numbers and SIP shared-line directory numbers.
• Privacy
  • When privacy is enabled, the other shared line phone cannot barge into an active call
  • However if the call is on hold, they can still retrieve it
• Privacy on hold
  • Together with privacy enabled, this will stop the other shared line phone from retrieving the call even if it was placed on hold

• Barge is supported for SIP shared-line directory numbers only. No configuration is required.
• Configure a share line
  • Max-calls default is 2

voice register dn 1
  number 1234
  shared-line [max-calls <number>]
!
voice register pool 1
  number 2 dn 1
!
voice register pool 2
  number 2 dn 1

• Configure hardware conferencing resource

• Configure shared octo line

ephone-dn 1 octo-line
  number 1235
!
ephone 1
  button 2:1
!
ephone 2
  button 2:1

• Configure shared line

voice register dn 1
  number 1234
!
voice register pool 1
  number 2 dn 1
!
voice register pool 2
  number 2 dn 1

• Configure a shared octo-line
• Set the privacy or privacy on hold status globally. Affect all phones
  • Privacy is enabled by default
  • Privacy on hold is disabled by default

telephony-service
  no privacy
  ! *** Optionally enable privacy-on-hold
  privacy-on-hold

• Set the privacy or privacy on hold status on each phones
• Add a privacy toggle button. Only on ephone with octo line

ephone
  privacy-button

• Configure a shared
• Set the privacy or privacy on hold status globally. Affect all phones
  • Privacy is enabled by default
  • Privacy on hold is disabled by default

voice register global
  no privacy
  ! *** Optionally enable privacy-on-hold
  privacy-on-hold

• Set the privacy or privacy on hold status on each phones
• Add a privacy toggle button. Only on ephone with octo line

voice register pool 1
  privacy-button