====== Global Transformation ====== ===== General ===== * See [[cucm-plus-d|+ Dialing]] for more information * Allow incoming call history to display the full E.164 number for callback * For Outgoing call to PSTN * External Phone Number mask - globalized the Calling Number * Translation Pattern - globalized Called Party Number * Route Pattern to matched globalized called number and select gateway * Called Party Transformation - localized the Called number at the gateway * Calling Party Transformation - localized and Calling Number at the gateway {{cucm-gtrans10.png|}} * For Incoming call from PSTN * Significant Digits or Translation Pattern - localized Called Number to match locally configure DN * Incoming Prefix - globalized calling number based on type of call * Calling Number Transformation Pattern - localized calling number with local offnet prefix to allow call back {{cucm-gtrans11.png|}} ===== Local Route Group ===== * Implication of Local Route Group when combined with +Dialing * User can use their local dial rule * The number is globalized * A single Route Pattern \+! can be used to route to their local route group gateway {{cucm-gtrans19.png|}} ===== Configuration Outgoing Call ===== * Global call routing (route patterns in global [E.164] format) is assumed to be in place already ==== Localized Call Ingress on Phones ==== * **Globalize Called Number** - Translation patterns for **dialed number normalization** (globalization) * Match local offnet dial rule e.g. 00.! and convert called number to E.164 format {{cucm-gtrans1.png|}} * **Globalize Calling Number** - External phone number masks in E.164 format for calling number normalization {{cucm-gtrans2.png|}} ==== Localized Call Egress to Gateway ==== * **Localized called number** - Called party global transformations for called number localization {{cucm-gtrans3.png|}} * Assign Called Party Transformation to gateway. * If the device pool is selected, the device pool will be the preferred {{cucm-gtrans4.png|}}\\ **OR** * Configure Called Party Transformation on the device pool. {{cucm-gtrans5.png|}} * **Localized calling number** - Calling party global transformation for calling number localization {{cucm-gtrans6.png|}} * Assign Calling Party Transformation to gateway. * If the device pool is selected, the device pool will be the preferred {{cucm-gtrans7.png|}}\\ **OR** * Configure Calling Party Transformation on the device pool. {{cucm-gtrans8.png|}} ===== Configuration Inbound Call ===== ==== Localized Call Ingress on Gateway ==== * Translation patterns or significant digits for reduction of called PSTN number to internally used directory number {{cucm-gtrans12.png|}} * Prefixes for calling party number normalization (globalization) {{cucm-gtrans13.png|}} * If set to default, then look at next level on the device pool {{cucm-gtrans14.png|}} * If again set to default, then look at the CUCM Service Parameters (Advanced Parameters) {{cucm-gtrans15.png|}} ==== Localized Call Egress to phone ==== * No requirements for called party number (already reduced to directory number) * Localized Calling Number - use Calling Party Transformation pattern * This allows the number display to include any local offnet dial prefix for callback {{cucm-gtrans16.png|}} * Assign the Calling Party Transformation to the phone {{cucm-gtrans17.png|}}\\ **OR** * Again if the device pool is set, it will be the preferred {{cucm-gtrans18.png|}}