====== Busy Lamp Field ======

===== General =====
  * BLF pickup
    * New in CUCMv7
    * Allow pickup of call using the BLF key
    * The Call Pickup group for the monitoring user must contain the pickup group for the monitored destination or call pickup will fail.
    * Can also configure to pickup from a hunt pilot number to support line group pickup
    * Presence Group do not apply to presence-enabled speed dials i.e. BLF
    * BLF Pickup is disabled when DND Call Reject is enabled on the monitored or monitoring device.
{{cucm-pickup5.png|}}

===== BLF Pickup Configuration =====

==== Phone Button Template ====
  * Under **Device > Device Settings > Phone Button Template**, configure Phone button template to have BLF
{{cucm-pickup-blf1.png|}}

==== Assign to Phone ====
  * Under **Device > Phone**, add phone button template and assign a subscribe calling search space
{{cucm-pickup-blf2.png|}}
  * Under **Device > Phone**, add a new BLF SD, enter the destination and check Call Pickup.
{{cucm-pickup-blf3.png|}}
\\

==== Line Group Pickup (Optional) ====
  * To implement BLF pickup for a line group, enter CSCsb47263 in the enterprise parameter Cisco Support Use 1.
  * To monitor a hunt list, add both the hunt pilot number and member DN in the same call pickup group

===== Service Paramters =====
  * Whether to get audio alert when the monitoring phone is idle or busy
  * When the monitored phone is DND, whether the watcher will still get the status
{{cucm-pickup-blf4.png|}}