Differences

This shows you the differences between two versions of the page.

--- eduardo:cisco:cucm:cucm-blf [2010/07/08 14:27] – external edit 127.0.0.1
+++ eduardo:cisco:cucm:cucm-blf [2024/02/23 08:20] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+====== Busy Lamp Field ======
+===== General =====
+  * BLF pickup
+    * New in CUCMv7
+    * Allow pickup of call using the BLF key
+    * The Call Pickup group for the monitoring user must contain the pickup group for the monitored destination or call pickup will fail.
+    * Can also configure to pickup from a hunt pilot number to support line group pickup
+    * Presence Group do not apply to presence-enabled speed dials i.e. BLF
+    * BLF Pickup is disabled when DND Call Reject is enabled on the monitored or monitoring device.
+{{cucm-pickup5.png|}}
+===== BLF Pickup Configuration =====
+==== Phone Button Template ====
+  * Under **Device > Device Settings > Phone Button Template**, configure Phone button template to have BLF
+{{cucm-pickup-blf1.png|}}
+==== Assign to Phone ====
+  * Under **Device > Phone**, add phone button template and assign a subscribe calling search space
+{{cucm-pickup-blf2.png|}}
+  * Under **Device > Phone**, add a new BLF SD, enter the destination and check Call Pickup.
+{{cucm-pickup-blf3.png|}}
+\\
+==== Line Group Pickup (Optional) ====
+  * To implement BLF pickup for a line group, enter CSCsb47263 in the enterprise parameter Cisco Support Use 1.
+  * To monitor a hunt list, add both the hunt pilot number and member DN in the same call pickup group
+===== Service Paramters =====
+  * Whether to get audio alert when the monitoring phone is idle or busy
+  * When the monitored phone is DND, whether the watcher will still get the status
+{{cucm-pickup-blf4.png|}}